Line 6 Flextone III Plus Guitar Amplifier "channel select working amp" Questions

...channel select switch doesnt work. theres no distortion when switched on. it doesnt light up either. clean works fine Replace the switch. You gave no make/model number for your amp but if it has a ...

...channel, Why? By the way, when plug in to the effect loop it does work well. But my configuration does not allow me to put the pedal there.... DO NOT USE a guitar pedal in effects loop as it has the ...

...amp. I set it at approx 3-4 gain on clean channel, and set master volume at approx 5-6. This works well for clean tone with my LP Custom (humbuckers) and pedals. The trouble is if I throw the crunch ...

...channel all settings sound the same(vypyr 30) amp seems stuck on 1 setting and only works properly now and again,effects and st.box working as they should,seems stuck on twn clean,with no discernable ...

...amp, the surge may have ruptured components in the circuit. Most likely are components on page 2 of the schematic in the upper left corner associated with the channel selection, C77 and TR1 would be ...

...channel that is working is the Tape In, when "TAPE TO MAIN MIX" is selected. Drum machine to ( INSERT 1 - 16 ) -> No sound at all. There is NO way to select channels to "Source"... The ...

...amp; 5 yellow overload light is constantly lit. No sound from either channel (just a faint hum when volume slider approaches max level setting). All other channels work as intended. Power amp output ...

amp seems to work incorrectly. E.g. i select clean, then set up delay. When I change to crunch then, there's no delay, though from the manual I get it that I should hear the effect when in manual mode

...channel amp types, the acoustic and jazz modes are way less powerful than the others. Even with the volume on 5-6 and gain 5-6 it' still quiet enough for me to play in my bedroom cloase to the amp. ...

...channel selection, looper and such all work fine. I've depressed the toe like the manual said, but nothing happens. I've tried tons of times to get the expression working, but i've never ...