Kenwood VR-407 Receiver "save station" Questions

HOW DO I SAVE RADIO STATIONS TO THE PRESETS? HI, CAN ANYONE OUT THERE HELP ME? I HAVE AN AIWA XR-AVH1200 RECEIVER, THE PROBLEM IS, I CAN TUNE IT TO MANY STATIONS BUT I DON'T KNOW HOW TO SAVE THE ...

...save the station under. Neil Easy! Just get to the frequency / channel you want, the press AND HOLD the preset key until the unit registers it (takes a few seconds. Jaime No, that is how many presets ...

...am having great difficulty with the FM station presets. 1-8, A-E = 40. Great. But in "Auto" mode it saves stations that barely have signal, half way up the dial it's max'ed out. I've followed the ...

...save for a few seconds. Voila! You can now change station either by pressing Presets and moving dial...waiting for the station to load OR press jog/select to manually tune to the station of your ...

...on the remote.  MEMORY will blink on the receiver's display.  While MEMORY is flashing, press the button(s) on the remote for the number you want to save the station under.  ...

...tune the station with the frequency up, or down button, when you get to your station you wish to save a preset for, press and hold the number button you wish to assign for that station, rinse, ...

...r35. when do i press the green button to save a station setting? set the channel preset number first. Then tune to the frequency. Then press the green button to store. Repeat for the next

...save fm radio stations for the recall station option. Usually holding the desired button (#3 for example) for more than 3 seconds. You should hear an short beep to acknowledge the button was ...

how do I set the FM radio stations on buttons 1 to 8 Try tuning to the station you want and then just keep the button pressed down on the preset you want to store it to until it saves

...searching for the stations then pressing the number i want that station to be but it does not work After finding the station press the memory button and then the station preset you want to save it