Kenwood VR-407 Receiver "front 3 speakers work surround" Questions

front 3 to work, but not the back 2. I notice that I can only get surround sound on when speaker A is on. Speaker B setting will not allow me to switch among modes (Theatre, club, hall, etc). For what

...3 on the TV, but for any sound to work, PS3 or TV, the Surround sound has to be set up on Video 1. So, my rear right and rear left speakers are working, but I'm getting absolutely no sound coming out ...

...3 years old. Since last november, i initially faced a problem with the surround left speaker not producing any sound. Sometimes it used to work, mostly it wont work. Now i am facing the same problem ...

...front of you. Unless you are using zone 2 & 3 the receiver's surround back will work. if you only have left,right,center,sub & rear; the rear speakers should go to surround speakers not ...

...front 3 speakers work and the back right speaker works. The subwoofer and the back left speakers do not work. We have checked the connections and at one point the back left worked but then the front ...

...front, 1 centre, subwoofer, 2 speakers at the back). THE BEST SOUND IS WHAT SOUNDS BEST TO YOU, HOWEVER DO THIS: 1, USING THE SETUP MIC CONFIGURE YOUR DENON, PAGE 8 OF THE MANUAL. NEXT 2. RAISE THE ...

3 in the front and the 2 in the back make 5 and the.1 refers to the subwoofer which only needs a tenth of the signal so that equals 5.1, when I move I will run my unit in a 7.2 format and the .2 means

...3 weeks ago brand new. problem is i get a high pitched whine from all 7 speakers regardless of the volume. i trouble shot it in any possible way.even took it upstairs to a diffent plug and it still ...

3 front channels and 2 rear channels. The ".1" is applied to all the speakers (LFE). If you read the manual on page 37, you'll see that "3.2" is displayed with either "Dolby Digital 3.2" or "DTS 3.2".

...3 in front and 2 in the rear) and one sub. The sub and the 3 front speakers work, but not the rear? did my fiance do something to the remote, hit a button to reset, etc? I have been playing with it ...