Kenwood CT 401 Hi-Fi Stereo Dual Cassette Deck Single Dual Cassette Deck "tape deck clicking" Questions

...tape deck rs-eh600 wont play it just clicks my tape deck wont play in either compartment it just makes a clicking noise and chews the tape up Another dual deck it seems- the unit will need service by ...

cassette recorder loads tape but will not play it it just clicks away teac stereo cassette deck r- h 300 make sure the tape clamp is fully clicking down when the drawer has closed

...deck A won' run the tape but just keeps clicking as it auto-reverses. Hi amitchell47, The rubber belts that turns the gears is already worn out. Usually, there are two rubber belts in a cassette ...

tape deck and the "A" side makes a clicking noise and then the display flashes a "--E--" code on both sides and I have to shut it off to get the tapes out. If I play a tape in the

...tape deck door has suddenly stopped working. the tape is inside and when i turn on the wpower there is a clicking sound. it is a TEAC AD-500 CD player/reverse cassete deck Without physically looking ...

tape deck makes a whurring and it clicks and stops. It does this a few times and then nothing happens. The tapes wont eject, but the screen looks fine. They wont play or record almost like its locked.

...deck is about 7 years old, but has low operating time, probably less than 100 hours. The VU meter registers when the clicks occur, and shows that that the clicks are of roughly equal strength in both ...

...tape deck. probably a losen rubber band. it clicks because the rubber is too lose to move the mechinal parts. so when you power off, it losen the whole machanical parts..it is very easy to ...

tape deck which was not in use for several months. When I tried to use it, neither deck would drive the tape and in fact the tape is inside and the door will not eject. What is the most likely problem

...tape deck will not play tapes My tape deck powers up fine , the tape draw operates properly but when i try to play a tape or try to rewind or fast forward it just makes a clicking noise! Any ideas?? ...