NAD C352 2-Channel Amplifier "protection mode" Questions

mode goes out.Good luck, E Disconnect all speaker connections and rca cables. Leave power, ground and remote wires intact. Try turning on again. If you still have a protection light your amp is faulty

getting my amplifier out of protect mode my teac amplifier has gone into protect mode wat do i need to do to get it out of protect mode can u reset it or do i need to buy a new part There is a problem

protection mode you are speaking of, is called DC Protection. It means that either of the amplifiers have DC voltage on the output, which will either turn off the speaker relay, or power supply relay,

protection mode. have soldered many suspected dry joints and checked voltages on IC502 (Power Amp IC) PLEASE help!!! The protection mode is often switched on when an overload has/is happened/happening

amp in protect mode my amp keeps going into protect mode and i dont want to send it away for another month if you could help me that would be great Most time they go to protect there is something ...

...protection mode plugged in my pioneer today for the first time and the light on the unit is flashing red. owners manual says it is in protection mode yet I can not seem to get it out of this ...

sony home theater system i have a sony 7.1 home amp and it keeps going into protect mode i have unpluged all the speekers thinking that there might be a short in the wires but it still keeps going ...

...protection mode, can I fix this problem. It wont come out of this mode...thanks..John Having the speaker wires hooked up backwords will not cause protect mode. If the wires were crossed (in other ...

...Protection'' Mode after powered 230Vac line. I have removed all the connections including speakers. However, the receiver still remains at '' Protection '' Mode. What should I do ? Thanks & ...