...the fuse but that didn't change anything. Is there a way to bypass the code or is there a generic code? no leave it on for at least an hour then it should reset itself so you can re enter the ...
Question about Sony Audio Players & Recorders
...change the functions. Have reset the unit and checked th e fuses. Still nothing. This stereo has been in the vehicle for 2 years. A few times when the faceplate was taken off and put back on, it went ...
...fuse, changed the lead and used a different electric point but nothing has changed. Any ideas? Hey there! It seems the circuit cell has gone dead. Which caused it so 'suddenly' not work any longer. I ...
...back light is funtioning. Keep us posted on what you find. Dan http://klausnahr.wordpress.com/2007/06/19/aiwa-xr-mds7-display-reparieren/ a fuse is dead , change with a new one, things will be
CHANGE TO THICK WIRES NOW IS ALL GOOD.DO THAT THEN EMAIL ME BACK AND LET ME KNOW([email protected].. Check Connections on Output Ic,s Ic651 and Ic601 ( Only if you are a Qualified Tech
radio, cd, dvd)but have the same results. I can turn the volume up to get the output but am concerned on the cause of the reduced output? make sure your tape monitor switch is not on. I'm not sure how
...fuse that could have blown, not to likely but it's possible. You have to take the top off the receiver with a #1 phillips or a T10 torx they vary. It's about 7 screws, pop off the top and look from ...
change. If you have some experience with this sort of repair work, then I would prescribe changing the output IC(mounted to the large alloy heatsink. I am happy to answer any further questions you may
...fuse, etc. . Still won't stay on. Ok mine works now. Here's what I did. Since the problem was either the speakers or something inside the receiver. I removed all the wires from the speakers then went ...
34 questions posted
Usually answered in minutes!
69 Questions
53 Questions
46 Questions
31 Questions
27 Questions