Panasonic CX-DP801 8-Disc CD Changer "manual eject magazine" Questions

...eject magazine As soon as I turn on the cd player, via the remote, I get error msg "E3" and nothing happens. The cd magazine also will not eject. It seems as though the problem is in the position of ...

...manual eject port next to the cable connectionl. The magazine looks fine and clean as do the CDs. I hate to buy a new magazine as was suggested by the local Ford dealer ($25 on ebay) if that is not ...

...magazine does not eject alpine cd changer magazine does not eject good day, you may want to do it manually if its jammed, you may find a pinhole on it and u can use a paperclip, insert it in the hole ...

manual eject/ you have to open the cd changer and you will notice that 2 or 3 disc move to the right side under the tray or on top pusch them back into the cd magazine but don't force the unit and don

...there should be a manual eject button or switch that will release the magazine from the holding unit. Besides that i would refer you to a professional who actually works on Sony ...

magazine is jammed and wont eject was the unit recently shipped to you ? if so open top cover , if the empty magazine was left inside the cd trays can slide out into the playing area and jam the unit

eject cd magazine Hello, What are the steps you have done so far to fix this issue? Have you tried plugging into a different wall socket? Also, anything you know which might have caused this issue? Hi

magazine. And all I get is CD errors when I try to change discs from the head unit in my dash. If i try to eject the mag it just grunts a little, appears to be attempting to retract the disc and eject

...eject the magazine from the changer. I have figured out how to release the actual magazine, but one the one cd (that I assume was being played) is over to the side and I can't figure out how to make ...

eject the cd magazine from my kdc-c715 10 disc cd changer. There is a manual eject slot on the side of the CD changer. You will need a small flat head screwdriver or a pry tool to insert into the slot