analogue tv tuner card I CANNOT GET A TV SIGNAL FOR MY COMPUTER.MY ARIAL IS A ROOFTOP ARIAL WITH A STRONG SIGNAL,BUT CONFIGURING IT MAKES NO DIFFERENCE.CHECKED CONNECTIONS AND TRIED SEVERAL TIMES TO ...
...channel strength is low Hello If you are using this TV with Cable connection, the strength of cable signal is low. Contact the cable operator and ask him to put a signal booster at your premises. If ...
Question about JVC Televison & Video
...many of the late model tvs with a crt (picture tube) would go to a blue screen when there is not signal from the cable or antenna so you don't get the irritating white noise and black and white ...
...uses RF and older TVs work fine. The problem comes when you try to grab stations from the air. The signal is still UHF, but the information riding on that UHF signal is digital, and will need a ...
...signal. Since you are not seeing channel information when tuning, I suspect that the television is set to display an A/V input instead of the internal tuner. With a working remote, locate the TV/AV ...
signal source (ant/cable) select cable. Then run channel scan. This is an older TV and will require some time for the system to scan the cable channels and adjust. The process could take up to 20 min.
...top box's, or TVs antenna or ariel connection is tight or not. It it is Ok, if you are receiving signals from cable, ask the cable operator to check the signal strength at the cable end of your ...
Question about Konka Televison & Video
Hi, What is the procedure[using remote]to go between TV signal and DVD signal on a Konka model KL22ES62Q TV set cheers John. Your TV does not appear to be with in inbuilt DVD. So you must use (1) TV ...
4 questions posted
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions