Panasonic TH-50PV30 50 in. Plasma Television "time power surge tv" Questions

...power surge. TV was on and all of a sudden it went off. (at least that's what my kid says). Now it just blinks for 10 times. I have cable connected to my DVD/VCR and the TV connection is routed thru ...

power other than a surge protector if you have one. Unplug it for 30 seconds to a minute or more, then plug it into the wall directly and attempt to power it on. Also, this can happen if you are using

...power surge. I went to the shops and replaced the fuse. When I turn on the tv all that happens is that the LED light flashes 10 times. Whats the problem and how can i fix it. My tv Is A Panasonic ...

...Power surge, irregular power supply, excess power supply, etc can affect the unit thereby making it to misbehave.The power supply board of the TV has few capacitors and IC. If any of these IC's ...

...surge protector still works. we also completely unplugged the tv for a half an hour, just in case it was over heated or something, but when we plug it back in, the blinking resumes. help! hello, ...

...power outages may cause the TV to turn off on its own. If you are using a surge protector, try connecting the set directly to the wall outlet. In your case it could caused by a blown fuse, a leaky ...

...the issue, you may have had a small power surge from either your wall outlet or one of your source devices. It is recommended to connect your TV to a surge protector if you haven't done so

...power surge of any type that was causing the random noise. What can it be? the power supply inside the tv, is what it sounds like to me. I fixed a 50 plasma about a year ago that all it needed was a ...

...power board failure. The board is unable to distribute the proper current at this time. you must replace this failed board asap. this will fix this issue. If you get it fixxed or a new TV get a surge ...

...time so "brown out" possible. I get 8 blinks on the power led. Please help hello, I went to the Panasonic web site and it said driver sos3 (SS energy recovery circuit) on the SS board. call ...