Panasonic TH-42XVS30U 42 in. Plasma HDTV "phillips flat screen tv taking" Questions

...phillips 32 inch lcd with a tv i got "as is not working" at auction site for very cheap everything works fine, if you try to buy a replacment screen at a parts store forget it they cost to to much, ...

screen got slightly brighter before it got dark again and the light returned to blinking. Any help would be appreciated, the manual is useless! My phillips 42" is the same way. Just started popping up

...flat screen how do I take off the bottom stand i had the same problem...but its simple...u need a Phillips screwdriver....on the back of the tv next to part that sticks out farther than the rest of ...

PHILLIPS LCD TV MY KID SHOT HIS BB GUN RIGHT INTO OUR tv SCREEN. IT DID NOT PENETRATE THE TV, BUT NOW WE HAVE A SCREEN WITH A BB SHOT ON THE SCREEN . WHAT CAN I DO? you should take down the tv and and

flat screen tv that turns off on its own whenever... what could it be? I had a similar problem with my Phillips 42 in. LCD HD TV. Here's the problem. The Power Supply Board. I opened my TV up(warranty

Phillips flat screen has a vertical blue line, about 2inches wide, running from from the top to about a third down the 52 inch screen. What causes this Take ur hand and pushes all around the tv frame ...

...screen goes black randomly but continues to have sound I had a similar Problem with my Phillips 42 in. LCD HD TV. Here's the problem. The Power Supply Board. I opened my TV up(warranty was up of ...

...screen freezes and the power shuts off again. This cycle continues unless I unplug the tv. I replaced the poser board with no difference. Any advise on what board might be failing? I had a similar ...

Phillips 42" flat screen ty has two very wide horizontal bars across the screen, the lower one being wider. When the situation first began, there were random and MANY red (mostly) and black pixels ...

...Phillips screen at start up. The TV is only a couple of months old and in the past week twice it has had issues. When we turn it on it just stays on the Phillips start up screen and will do nothing. ...