Panasonic DMR-E55 DVD Recorder "player open lid closed" Questions

...player still thinks its open. There is a mechanical switch that is operated by the lid as it's closed. Sometimes, a DVD player such as yours can be made to work by pressing down on the lid but ...

...player it says that it is open and wont read the disk, can you help The lid closure interlock is not satisfied; it's located to the left of the open button (a tab on the top lid should hit the switch ...

time i open my dvd player when the lids closed it says open it wont work when i turn it on and open the lid then close it says open still The door sensor is bad, or the timing gear is out of alignment

player. As a result, the device keeps thinking it's been opened and closed. If I put a heavy weight on the 2 ''Press to open'' point on the lid, the DVD plays through. how can I tighten the lid up, so

...lid the open icon at top left corner shows and it will not play It sees the lid as being open. The lid has a projection from it that pushes a door switch when it is closed. Is this piece broken off ? ...

...player has said open since I got it a year ago. I would open and close the lid a couple of times and it would read and play. I had to be careful not to bump it or it would say open. Today I have been ...

player but it keeps sayin its open when its shut!! therefor it wont play any dvds! LID SWITCH IS BROKEN, CHANGE IT OR THE COVERLID WHICH HAS A SMALL 3MM SIZE OF PLASTIC MATERIAL WHICH PRESS THE SWITCH

...player and closing lid, display reads 'no disc', with lid open and lid interlock overridden - same display info. with the slightest of finger pressure on disc surface and reactuating lid interlock ...

player. Temporarily you can hold the lid closed with your hand and press play and leave the lid after it loads the disc. But for permanent solutuion you will require to repair its lid switches, Simple

...lid is open. If it says that it is closed and the disc plays then the lid isn't closing securely. If it still says the lid is open after you can hear or feel the switch click then it may need to be ...