Panasonic PT-56TW53 56" Rear Projection Television "push button time turn tv" Questions

turn on when the on button is pushed, but the power light blinks 5 times my tv won't turn on when the on button is pushed, but the power light blinks 5 times 5 times LED blinks in Panasonic PT

...button flashes green when pushed the first time, TV does not come on...the next time it's pushed the light illuminates then gets bright and turns off...this happens two to three times...after that ...

...push the TV button, it should flash once and then also stay steady, next input the code for symphonic, they are: 0906, 0520, 0324,0247, and 0004. Enter each 4 digit code and wait for a response. ...

...push button to turn on tv but it only does a click like it is going to turn on and then another click bit it wont turn on. Finally a red light is just blinking. Any suggestions, is there a freeze ...

...push the power button on the remote, and the power light on the tv would come on and flicker for a few seconds, and the tv would come on. Now, when I push the power button, either on the tv, or the ...

...button is pushed the TV will shut off and then I have to unplug the TV in order to get the timer to turn off so that the television can be turned back on. Each time the TV is turned back on it will ...

...push? Is it possible that one of them is stuck inside the unit? With the set unplugged, try pushing each of the buttons on the set. You should be able to feel the switch engage. If any of them do not ...

won't turn on I push the power button and it tries three times to turn on then stops. I have the same problem; I push the power button green light comes on tv clicks but doesn't come on.

push the power button on the television, nothing happens. I've pressed the reset button and the power light blinks for about 25 seconds or so before stopping. After I would push the power button again

...push the "P-" button about 5 times then push the left hand square button (looks like square with arrow pointing right) several times until it cycles to the input device.... order is ext1, ext2, ext3, ...