...off the television with our remote. We replaced the lamp about a year ago. This sounds like a SMPS overcurrent problem, or it may be a problem with the processor that controls the front panel ...
Question about Mitsubishi Televison & Video
Same guy more info...code 2 blinks pause 2 blinks this code indicates that a power supply line. is shorted. the safty cuircits have detected an overcurrent or overvoltage situation.
...blinks 6 times can i fix this? any estimates on cost? Problem on the D board, overvoltage/overcurrent protection circuit, possible part # is A1300417A , Sony also has CRT issues so be ...
...the Tv unpluged. This might be due to a problem related to the SMPS (Switched Mode Power Supply) overcurrent / overvoltage dectection circuitry. When an overcurrent or overvoltage condition is ...
...convergence output IC's need to be replaced as they are drawing too much current. A 2-2 code means overcurrent
...will not come back on . Red light blinks 6 times, then repeats itself. this is an indication of a overcurrent/ overvoltage error....meaning short in a voltage supply. I have seen this problem in
6 times, Diagnosis: LOW B OCP/OVP (Overcurrent/over voltage). Possible causes: +5 line is overloaded. (A, B boards), +5 line is shorted. (A, B boards). Symptoms of the problem: No picture. replace the
sony kp_51ws500 light blinking 6 times Thats the error code for Overcurrent or over voltage protection shutdown. Which means the +5 v line is either shorted or overloaded on the A or B boards. I ...
Question about Televison & Video
...then the power led on turn on..and b+ vots is 25v what is the tv model & make, maybe o have a overcurrent on that supply
...Most Sony 6-blink codes for projection TVs follow this pattern: 6 times, Diagnosis: LOW B OCP/OVP (Overcurrent/over voltage). Possible causes: +5 line is overloaded. (A, B boards), +5 line is
704 questions posted
Usually answered in minutes!
462 Questions
520 Questions
406 Questions
457 Questions
298 Questions