Panasonic PT-47WX42 47" Rear Projection Television "tv picture bending sides" Questions

TV picture has colors separated, image blurred Picture tends to bend inwards from all sides and is blurred. Tapping the sides seem to temporarily fix the problem. Could it be a loose contact? If so, ...

...picture? Projection TV sets have several common problems listed below. Problem #1) Convergence Symptoms: Screen Looks 3D Colors wont align Screen may look distorted No Audio/Video - TV makes a ...

picture and writing and all info in a circle type format replace box in side tv, about a size of a cell phone,may little bigger than that  the. cost for the part is about $200.00 or  it

...tv it looks like the picture is to big for my screen,on the left hand side the picture bend and a little bit out of focus on that same side ,could you help me please,thanks That sounds like a ...

...tv picture goes bad. It looks like the colors go off kilter on the outsides. It looks like it the picture bends in from the sides and from the top and bottom. If I turn it off and on it's still bad. ...

tv the picture is bending into the center of the screen and the letters are double and colors are off Press Menu then setup Look for Convergence,If you do Not See It listed then you have a Blowed Fuse

...TV back in. Best wishes, I hope this was helpful. Replaced the lamp three weeks ago in my FK-42WE610. Picture was as good a new. Now have no picture and a series of 5 red blinking lights on the ...

...tv the screen will line back up giving you a perfect picture, but only for a minute or two. Is there a loose connection, or has something burned out? I'm at a complete loss. The lights in the tv are ...

tv the picture bends at the sides and has now left a 1" gap on the left side of the tv. Convergence IC's need replacement,moderate technical abilityneeded......cost about 400.00 to repair.............

tv blurred and concave w/ a half bend coming from all sides; picture off register. The Convergence circuit has failed. it is not a simple repair and I would suggest that a Sony repair facility to do ...