...red in the front of the panel. What i also noticed is that in the back of the set on the pwb there were to green lights that are located on that board blinking and making a noise.. also i noticed ...
...wire harnesses and removed the whole chasis from the set. My question to the tech guys//// has anyone heard of this before? Could it just be a simple cap that burned out and I could bring the chasis ...
Question about Mitsubishi Televison & Video
red wire along with a couple of other wire coming off it ). The horizontal transistor is sometime the cause of this also, so if you have a transistor, or diode checker, check the horizontal transistor
Question about Mitsubishi Televison & Video
Mitsubishi big screen Model ws-55809 shuts off after powered. I have a Mitsubishi model ws-55809.When turning on the power button it clicks a couple of seconds and turns off.It was produced in January
Question about Televison & Video
...burned spots on circuit board. We looked at picture tubes and the boards have alot of dust build up on them. Also the blue picture tube when you look throught the lense seems to be white in color and ...
...wire pulled out of the screw in connector that screws it to the back of the tv, that's not a problem at all. I say this because you say she tried to plug the bare wires back in- so you're left with ...
Question about Philips Televison & Video
...red wire out the top). 2) Check for cold solder joints - Look at the modules and resolder any joints that appear grainy or have rings. 3) Check the area of the convergence ICs for Pico fuses or low ...
125 questions posted
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions