Panasonic PT-53WX42 53" Rear Projection Television "remove old tint" Questions

...the front panel and was able to remove the panel. Then I adjusted the Red Screen control. I found that if I tuned in an old Black and white movie I could adjust the color fairly accurately. Good

...dlp_light_engine which explains in detail how to remove the old engine and install a new unit as well as where to get it at the best price. Thanks for using FixYa and for the generous rating. ...

...old....my Q is, my screen has a really bad red tint to it, i was told i can just replace the bulbs in it and that would fix it. Is that true? the picture is fine...everyone is red though! and ...

...remove the boards from the back of TV. Use small brush, like old tooth brush, and acetone. You can get acetone from hardware stores Look for rusted wires or parts and replace as necessary. Good Luck, ...

...old. There was a noise coming from the small fan underneath and just behind the lens are where the bulb faces to project the light. Think it was going bad and concerned for heat, I removed the fan to ...

...old Hitachi 51in rear projection TV. On this past Saturday, the picture all of a sudden darkened a little and has since stayed that way. I've tried the Magic Focus and even changed some of the video ...

...old. Sony TVs has an Optical Block issue. If there is an issue with the optical block, then there will be green, blue patches or tint on the TV display. Try resetting the TV to the factory settings ...

...tint I have a Mitsubishi DLP TV that is just over a year old. In the last week, I've noticed some fading of the colors. The whites are a bluish green. I've readjusted the PERFECT COLOR back to the ...

...old 46'' Rear projection TV Model SP46L5HX, has got a bad tint of the yellow greens. Can I fix it myself? I tried the menu solutions but they didn't seem to change anything. Have I connected it ...

...Remove the circuit board and clean the old solder off & resolder the modules pins to the circuit board reconnected the board and then retest by again pushing on the heat sink. This is a caused by a ...