Panasonic PT-50DL54 50" Rear Projection HDTV-Ready Television "fan cool rca tv" Questions

...and can I do it myself? Where do I get one? the fan is old and, is off balance (noisy) it can't keep your tv cool so the tv shuts off open the tv and, remove the fan. replace it with one off ...

...FAN MAKING TOO MUCH NOISE, NOTICE PICTURE SEEMS TO FLICKER SLIGHTLY, WITH NOISE FROM FAN. REAR PROJECTION RCA 2006 The D52W19 Tv doesnt have any fans since its a rear projection TV, only DLPs have ...

...RCA HDLP61W151 TV. I am trying to determine where the loud "Fan noise is comoing from. The noise continues after the TV is turned off for about 45 seconds or so. Does noise after the TV is turned off ...

how turn on a rca tv that not powering on. my rca projector tv model p52923, does not power on what the problem and how can i fix Replace bulb and clean out all cooling fans.

fan keeps the DMD board cool while working and if the fan does not spin your TV will not turn on. You might need to replace it if it is not spinning. If the fan is spinning, then check the color wheel

RCA 61" TV (HD61LPW165) Lamp Fan making noise Lamp/bulb cooling fan is making a squealing noise. The number on the fan is AFB0812LL. Where can a replacement be purchased? How does one make the actual ...

...RCA tv has been on for a few minutes it starts to make a loud buzzing noise. The tv picture and everything else is working properly. Sounds like the cooling fan blades are hitting something (possible ...

RCA Scenium (D61W130). Is there a remote control code to fix this? I had the same problem with mine. It was overheating. I installed a small cpu cooling fan on the back of the unit. No problems since.

...rca hd tv 42 inch model #40LA45RQ stays on for about 15min to half hour goes off please help hi, Check the lamp cooling fan. If the fan is faulty then the lamp will become overheated and the ...

...apparently the computer tells the tv that it will not be able to cool. I cleaned things using air and basically followed the wires for the cooling fan and wiggled them... lol.. works fine ...