passed the recorder works fine. use scart lead put one end into the digital ( BOX or TV ) out put ( AV1 or AV2) and the other into (AV1) on vcr then change the mode so AV1 shows on vcr display you can
...AV1 & AV2 Input Right side audio not acception & there is no Right side audio out. But in Left side working ok. Please give me suggestion for service it seemed to have a problem in the audio ...
...Recorder which has 2 x scart sockets on the back. 1 marked AV2 DECODER/DECODEUR(EX) the other AV1 (TV). The AV1 scart connector works fine on the TV but when I connect the AV2 to my Sky box I ...
...(R) of TV and AUDIO OUT (L) of VCR will connect to AUDIO IN (L) of TV. Play VCR or DVD and select AV1 or AV2 of TV using TV remote control.This button may also be labelled as TV/VIDEO on your TV's ...
...tuned into it or its on an av channel. anyway put a tape in and press play.(assuming you have av1 connected to tv by scart lead) failing that try wriggling the scat in the back of the vcr while ...
...AV1 and I can't toggle to any other station....it's driving me mad!! Any suggestions ?? The proper protocol for the set-up described is to have the source such as cable, sat, etc to be connected to ...
...working fine using channels 1 to 5 but doesn't accept an channel input above 80 so how does she record three digit channels? Hi, as stated on other post, VCR cannot be programmed storing sat channels ...
...tune in manually. To make matters worse the vcr thinks my video channel is channel 4 whereas it is AV1, further on viewing things through channel 4 (my only undesired option!) the picture quality is ...
...broadcast by a transmitter. As long as the vcr has two scart sockets you can connect your TV to AV1 and the sat box to AV2 and it should record the sat picture and you can watch it by switching ...
4 questions posted
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions