pressure washer won`t pressure up engine runs good pump does not produce pressure Have you tried adding 30 wheight pump oil,under 1 qrt usually
...pump Oil used in engine is SAE30, I would suggest adding bit of Nulon or similiar Teflon based before even first run as it will extend life of the engine, This is air cooled Honda and therefore ...
...is for adding lubricating oil for the crankcase in the pump. If oil is coming out of it while it is running a seal in the head wore out and water is getting into the crankcase and displacing the
...milky when its time to replace it an allways ck your oil level in pump and engine an refill if needed when adding gas to tank , its natural to be missing some each time as equipment gets older an ...
...pump needs oil added, however, I can't seem to firgure it out (how to add oil to the pump). I did notice that previously, I used to see drops of oil coming from under the pump. I I have a bad seal, ...
...pump? I just answered that question on another thread... will repeat: Oil used in engine is SAE30, I would suggest adding bit of Nulon or similiar Teflon based before even first run as it will extend ...
pump oil changed. Pressure is fine but while machine is running, engine seems to sputter and make popping noises. I have used carburetor cleaner and as well cleaned the fuel tank and added fresh fuel.
where do I put oil in pump rmv2.5g30 Is it leaking oil? The pump comes pre filled from the factory and is sealed so no oil should not need to be added.
oil sensor? I can't get the cord to pull. I'ts a possibility that the engine has seized, remove the spark plug and look at it it will give you and indication if the engine is burned up. Can the engine
2 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: