...clock set screen, would just like to clear clock set screen and be able to watch tv ( audio is fine) P.S. the sanyo tv has a 25" screen ( don't know model #, but remote has 'fxtg' written below the ...
...not a big deal but we use the 'auto on' function as an alarm clock. Any suggestions This set will need service on its time-base circuit. It could be a crystal, or a bad ...
Screen stuck on "Clock Set" Screen stuck on "Clock Set" screen The processor is lock up on the set unplug it for 40 Min. and it will reset back to normal.
how to set Tevion clock instruction for setting clock timer on Tevion receiver MD 3594R 04/01 need to get into the setup menu or unplug the unit and start over..its in the setup menu..
...turn on without warning in the middle of the night. I realize they're quite old, but is there any kind of fix for this? check the clock setting it seems you have set up a on time in the clock ...
...set the clock on a rca television You can find the instructions for setting the clock on your TV on page 18 after downloading the manual from ...
the clock display came on and i can't get it off... Most clock functions are accessed from MENU ... SETTINGS... TIMER CLOCK ... (Location)... ( Display Y N) Some options may differ slightly between ...
...set the clock. With TV powered ON press: [DISPLAY] and [VIDEO STATUS] on the remote at the same time. -or- Press the [SLEEP TIMER] key and set the SLEEP TIMER for "0" MIN. While the SLEEP TIMER ...
...are reading and writing to the data busses. There are a number of data busses running through the set for the boards to be able to communicate with each other. The tech will use the process of
...set is too far gone. The standby light blinks codes up to 7. If the standby light blinks more than 7 times it usually means that there is a short on the clock or data line. There are several small ...
7 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions