Sony KV-27S65 27" TV "open speaker box" Questions

...not work. I can put the volume up all the way and still no sound can you help with this. speaker problem must be open...or theirs a problem with the sound section try to replace first the

...like mine it the splitter box in the front open the front of speaker then take the screw of and in the middle of tv there is a black box with about 8 wire take the 4screw of and try it it should ...

...speaker for a spongeboy 13 tv? To replace it you have to open the TV. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up ...

...also seems to be slight "moire" swirl lines on the screen now too. I had a similar problem and opened the box and blew out a ton of dust. Still don't know what the problem was, but the sound

...open your TV to run an external speaker. I would opt to run the audio outs from the TV (If it has them) to a receiver and let it power a set of speakers. That would produce a much higher quality and ...

...speaker boxes or any materials that can cuse magnetic effects, nearby your TV. Turn the TVs loation to an other position and notice the effect. This is due to some magnetic field there to deflect its ...

...going up & down but you can't here it from the speakers.the screen is dark but the LED is lighted.I opened it and have some voltage testing.On the secondary,I found 118V on B+ but no HV(180).When I ...

...speaker volume on t.v. shows it is at max. volume ...but it is not. however, '' static'' came through very loud when it was switched from channel 3 to a'' regular'' station. (I use ch.3 to work with ...

...in the tuner. Unfortunately, this problem is not something you'll be able to fix just by opening the set and cleaning or moving speakers. Your best bet if you want to keep the set would be ...

...box on the TV and it had sound. Now no sound again.Checked all settings and everything's the same. What can I do now to fix the problem? You will need to open the rear panel after disconnecting the ...