...blink The tv wont stay on and the green light continues to blink These blinks are fault indications, called blinking codes. To count the blinking codes to Philips brand Televisions are some what ...
Question about Emerson Televison & Video
Direct TV remote does not control TV on/off or volume. Must use two remotes to watch TV. There are no codes to program the Direct TV remote to control Emerson TV on/off or volume. I have some codes ...
...blink of 4 times. It indicates the Vertical deflection is stopped. Possible causes: +- 15V is not supplied. (D board), IC8003 is faulty. (A board) Symptoms of the problem: TV has entered the standby ...
lost blue; otherwise normal; blinks 5x If the TV standby light is blinking for five times then you may perform the steps given below: (i) Turn off the TV then disconnect all the cables from the TV. ...
Question about Sony Televison & Video
my sony trinitron television will not turn on. it will click and the stand by light blinks, but there is no picture. can I fix this? It sounds that there is a direct short circuit in anywhere in ...
Question about JVC Televison & Video
...and that tv has been going strong for 4 years since repair. Good Luck Here is the users manual: ...
...blink or flash when the TV detects an issue. The number of times the STANDBY light flashes corresponds to a specific issue. If the TV is plugged into a power strip or a surge protector, please remove ...
...blink twice, aim the remote at the TV and press Power,the TV should turn off,if not ,repeat the steps using a different code until you find the one that works the TV. Here are the codes. ...
...TV will cause the STANDBY light to blink or flash when the television detects an issue. The number of times the STANDBY light flashes corresponds to a specific issue. Few examples are given below; ...
231 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions