Sony FD Trinitron WEGA KV-32FS120 32" TV "run channel scan" Questions

...Run a channel scan. Once the scan settings have been set properly, run the scan (usually done by pressing a "start," "scan" or "begin" button.) When the scan is complete, check to see if you are ...

THERE ANY WAY I CAN GET THE CHANNELS IN you probably just need to run a channel scan through the menu or setup of the tv..hope this helps? can't run a channel scan on my old philips tv mo# 27b800-7562

What does "please run auto channel scan " mean? Auto channel scan finds the local channels available over the air so that when pressing up/down channel it only goes to those channels

...run Channel Auto scan .it is hooked up to Dish satelite ant. .to run the auto scan.I cant get it to go on channel 60 to program the dish remote Thank you Mr McMillan sr. Used the tv remote go into tv ...

...to d AV device which must also be on, run a frequency scan and all available channels including ur AV channel will be detected and saved. After d scan, u can manually change channels to ur AV

...run channel auto scan." But it also states that if I sellect Cable/satellite, that the tv does not need to run the auto scan. When you press tv on remote to watch the tv, it takes me back to ...

...run the Auto Tuner as part of the quick setup earlier in this guide, please skip ahead to "Channel Summary" to continue setting up your television. In Auto Tuner Setup, the TV automatically scans ...

...run a channel scan this should find all the channels you want however you need to ensure you are scanning the proper source such as cable for cable or antenna for an aerial outdoor antenna. If you ...

when cable is chosen. I only get 2 channel choices when on tv. What do I need to do to get all the basic cable channel choices? Select cable, then with your remote, go to menu and perform channel scan

"please run auto channel scan" what does this mean? This will find every local channel and memorize so that channel up/down just goes to them.