...input from cable to air or vice a verse. The tv in my kids room is like that if it's set to cable with no input at the cable jack then it only gets one channel even after you try to add channels. ...
tv, but when I turn it on it stays in stand by and i don't have the remote control. Help?! If you use a fully-wired scart lead to connect the DVD to the set it should autoswitch to the correct
correct code, press and release the "mute" button. This should store/install the code. When I did this, the "TV/DVD (input)" button still didn't work. To change the input: Using the buttons on the TV,
Question about Philips Televison & Video
...Correct audio input (TV, DVD player, gaming system)5. Determine if it's the cable/satellite provider or TV station issue by checking other channels to see if the sound is isolated to a single ...
Question about Sony Televison & Video
...tv channel and ithe screen goes black,you can select another channel and the picture returns on the channel slected but then again goes black after a few seconds. Sometimes after leaving it on, and ...
Question about RCA Televison & Video
TV to the correct input (you might see screen flashes if you scrape the other ends connector with a metal object, quite safe for all concerned) this will check this part, then try sockets and settings
correct itself. Switching inputs or turning the tv off/on seemed to help resolve most of the times. Before I could get a service person to check it out, now it won't power on. The power will be on for
input nothing not just from the remote but from the tv buttons as well. We are having the same problem! Whats the solution!!!?!?!?!?!!!? If you see the logo at first, that tells you that the inverters
...tv. This could be a fault on high voltage section. Horizontal output transistor or flyback. But check also for loose connection/solder crack. That clicking sound may be the relay in action. hope i ...
Question about Televison & Video
tv takes it upon itself to turn the volume all the way down. Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage
62 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions