...bad on 50PA5500 as well as the top buffer board. Both can fail in a way that makes the TV to click on and right back off. The buffer may also fail in a way that allows the TV to turn on without ...
Question about Televison & Video
buffer is bad. There is an actual way to test this with an Ohm meter but so far with these symptoms this is the cause. Do all three boards at once, because the buffer damages the Y main and vise versa
...buffer board has come loose or the panel is bad. Try to reseat the connector located inline with the symptom seen on the screen, if it's loose or inserted crooked, the panel will show this problem. ...
...bad name to My friends and family I was lucky to get a tv repair shop that was a Sanyo authorized dealer to talk to me about this issue. They told me that they had 3 of these tv's in and they said ...
...bad power supply, or at least that where to start. Lay unit flat on a blanket or carpet, being careful not to twist the display. Remove the back panel, probably 15-20 screws, and measure output ...
bad. I purchased both relays from www.mouserelectronics.com the part # is JW1AFSN-DC5V they only cost $2.58 each it's best to change both even if one tests ok. I had a similar problem with my 42" set,
...bad, with times and money spent with no outcome. Honestly it will be less expensive and less hassle if you simply take it to a manufacturers recommended service center, contact a local or head office ...
bad answers given because of Vague or incorrect problems I would need you to reply to expert with the following: 1. Type of TV 2. model number 3. Symptoms (does it have sound when the panel goes black
...buffer boards - usually just lines but the screen would still get a picture? -logic board - controls timing, video distortion? -main/input board - still getting sound.. -x sustain board - ? -bad ...
13 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions