Sony KP-43T90 43" Rear Projection Television "stk 392 150" Questions

...stk 392-110)every year!can you suggest alternates that can last longer? stk 392-110 for matchline 46" philips rptv. some folks are suggesting stk 394-160 or stk 392-570 Use  392-150 the can ...

STK IC 392-110 Chips My blue convergence has gone out on my Toshiba 42hdx82 rp tv. After checking around I know I need to replace both STK IC Chips. Here is my question (2 parts)- At one electronics ...

...STK 392 150 ics and not the specified STK 392 110 ics is this true and what is the reason for the number change The STK392-150 is a little beefier chip than the 110's. The physically will fit in the ...

...Tried to adjust convergence and now have warped areas on the screen where the red and green don't align. Replace STK 392-110 with stk 392-150 ( better).Check any resistor around stk ic. Thank ...

can you use other than stk 392-150 like the 020s or the 110s? on sony kp53v80 You can use STK392-150 dont go any lower than the STK392-150 as they will burn out the 392-180 will work better

...Hi, thank you for visit fix ya. Here your solution: Replace STK 392-110 with stk 392-150 ( better), check any resistor beside stk ic , burn or open . If you have any question, I will be here. Thank ...

...screwed up Hi, thank you for visit fix ya. Do you have problems with you STKs ICS convergence. Replace stk 392-110, use stk 392-150 ( better). For parts, go to: http://www.encompassparts.com/ Thank ...

...STK-392-110--IT USES TWO STK-392-570 CHIPS. IF WHATEVER SET YOU HAVE USES A STK-392-110 YOU CAN USE THE STK-392-150 TO REPLACE IT--it is a higher current device than the 110 chip---there are some ...

...stk 392 150 ( both ) did not correct problem - HELP! I changed my stk 392 150 both of them. My image is worse. Instaed of 3 D its all rainbow like. Can not even read to get to the cross hairs. Still ...

...a number like STK 392-110 STK 392-150 or STK 392-180. These devices solder in, You may also find a burned resistor or two, and there may be a small fuse blown in the circuit. (not all have a