Sony KP-43T90 43" Rear Projection Television "stk392 150" Questions

stk392-150 I have had the same problem occur today...red shadows and the red convergence will not move left or right to realign. I noticed your solution of replacing the convergence board assembly. Is

...STK392-150 or STK392-180 ,should i switch to a higher pwr ic ? or stick to OEM The switch is definately the way to go. I use the the 150 exclusively. Make sure you replace both IC's and for burned ...

...stk392-150 no - stk392-560 can only be replaced by the same or a stk392-570when buying replacements make sure they are not the junk generics...anything under 20.00 each are generics....the real sanyo ...

...150 in the stk392 series? I want to replace these in my Toshiba 42h83 and want the best for the bang. We have always used the 150 in place of the 110 and 120. My shop has never had a problem and they ...

...stk392-110/150/180 all have same fit, form function except the 150's and 180's are basically upgrades for they're more stable (more heat tolerant than the original 110's); I'd buy the 150/180 myself; ...

toshiba 42h82 and is it ok to use stk392-150 to replace the stk392-110? thanks (6) 1.8 ohm 1watt metal film resistors for R7711, R7716, R7721, R7726, R7731 and R7736 yes the STK 392-150 will work fine

STK392-150 parts. The STK392-150 is a higher rated part than the 110, so hopefully it should last a little longer. You should also make sure that none of the power resistors feeding to the Convergence

better chip. Some people say go up to the STK392-150 but i had an issue trying that with a panasonic it keep burning resistors as fast as I could change went back down to a STK392-120 and worked great

...STK392-150?s instead of the factory STK392-110?s. I see in the spec sheet that they are rated for higher wattage, but wondering if anything will really be gained. Also, if the 150?s are used will any ...

can you use other than stk 392-150 like the 020s or the 110s? on sony kp53v80 You can use STK392-150 dont go any lower than the STK392-150 as they will burn out the 392-180 will work better