...schematic Model SD-P50A3-K Replaced 4 amp 125V fuse 2 times 1st time after 7 years 2nd time 1 week after Picture bowing from sides (sometimes) Colors changing as well (sometimes) Need service manual ...
2 resistors are in front of the outward stk chip, and they keep opening. the stk chip behind them stays cool, while the other heats up. does anyone know where i can find a schematic for this set? i am
schematics for fuses 52hm95 tv. 2a250v fuse may schematics for fuses 52hm95 tv. 2a250v fuse may be out . where would it be located hello the fuse would be located in the power supply, if the fuse is ...
KV-32FS120 Standby Timer blinks nine times Alas, my Sony TV has failed after 2 years. Nine blinks pause then nine blinks. After perusing the web it appears to be a common problem for many and Sony is ...
...2) Signal Generator or use the on-board Signal Generator (look in schematic for usage. 3) Multimeter (for resistance, and voltage readings) 4) soldering iron, solder, and de-soldering tools (solder ...
...2) On the schematic/service manual locate the convergence amplifiers (STK392-110, 120, 150) and the biasing resistors (Write the resistor values down from the schematic) 3) Unplug the TV and remove ...
...2) On the schematic/service manual locate the convergence amplifiers (STK392-110, 120, 150) and the biasing resistors (Write the resistor values down from the schematic) 3) Unplug the TV and remove ...
...2 code. I think the IC's may need replaced but I have to check to see if the fuses are blown first. Do you have a schematic or any additional information that would be helpful in troubleshooting this ...
...2 W, 5% tolerance rated at 68k. Does this sound correct to anyone out there? Is R706 = R7066? I have the same problem with convergence going off on the green gun and the TV shutting down. Pulling the ...
51 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions
