Sony KP-53V35 53" Rear Projection Television "silicone turn green" Questions

...Turn on the TV set, bring up the convergence menu and make sure the three colors--red, green and blue--converge and overlap at the cross in the center of the screen. This is needed to help converge ...

...turn it on and the green light blinked couples of times and then go off... not sound or picture at all. It also had a high pitching sound on the back because the flyback was arcing. I bought a new ...

...turn it on, it is dark with sound and the green light flashing for about a minute, then the set turns off and the standby light blinks red in a series of 5. Please help! Be sure its blinking 5 times, ...

...turn on or off? blinking V light resoldering the coils and some components try to find out where the most active components are with soldering problems resoldering components that are become warm on ...

...turn)  by moving the magnet close to the offending Red, Blue or,Green color CRT yoke or, tube while observing the movement of the CRT color line "cross" in a mirror ( try several places near the ...

...silicone all over the surface of the o-ring. Then place the o-ring in the groove in the CRT housing. 11. Place the lens in its position on the o-ring. 12. Place the lens cover plate over the lens and ...

...Turn on the TV and you see nothing but green. Determined it is NOT a gun problem. Been looking at the hyper board and suspect the problem is there. Any solutions? If the picture is all green and does ...

...Turn on the TV set, bring up the convergence menu and make sure the three colors--red, green and blue--converge and overlap at the cross in the center of the screen. This is needed to help converge ...

...green line along the edge of the screen that others have mentioned here. But after the repairmen replaced the circuit board, the set developed a high-pitched hum that is not in the audio system (even ...

Convergence problems I have a Sony KP-57ws510 and about a week ago I came home and when I turned the TV. on, the convergence was way offl specially at the corners. What can I do to fix it, or about ...