Question about Mitsubishi Televison & Video
manually change the channel up, only down. You can't change the device without the remote. It's like the t.v. doesn't recognize the remote anymore. This all started by just trying to change the device
Question about Zenith Televison & Video
allow you to be able to change the channel on your receiver and be able to change the channel on your TV to one of the analog channels you can tune into by connecting the coax cable directly to the TV
...change channels. It plays on channel 3, but can't get it to change to the rest of the channels. Please advise, Thanks Best thing to do is to buy a universal remote - preferably RCA/GE brand since it ...
Question about Toshiba Televison & Video
...channels from a cable TV or TV antennasignal. ... The TV must not be connected to a cable box through the coax ... The Option 1 procedure is for TVs with menus similar to the one shown below. ...
...manually change channels Are you using the supplied remote with the TV. Try Resetting the Remote. First, remove the batteries from the remote. Then, wipe the contact surface of the batteries. Then, ...
...me out to change the channels on the vga side you need a tuner that has separate component inputs and you would change the channel on that Select reset all inputs....consult owners
Question about Sony Televison & Video
...change channels. But when you manually turn it off, then turn it on again it scrolls. Here's the crazy part, the remote doesn't work for the tv, but i tried to see if I could program the cable box ...
Question about Mitsubishi Televison & Video
...manually... If you can change channels with remote then TV is OK because it has only one infra red receiver (remote receiver) to catch remote signals. So TV remote seems bad as it works on channel ...
...manually change the channel to 3 using the buttons on the tv, it jumps from channel 2 to channel 5. Any suggestions as to how to get it to channel 3 without the remote? The easiest will be to make ...
...change it to English and then Look for Auto program for channels reprogram so it will lock on channels that it can pick up the remote doesn't have language selection, that is done with the TV setup ...
130 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions