...Try replacing the batteries in the remote. If that doesn't work, start looking for other sources of IR(infrared). In some rare cases, direct sunlight on the TV will get it to do strange
Question about Toshiba Televison & Video
tv on. In the main menu select "CABLE" AND NOT AIR.With the cable connected to the coax fitting then turn set on and look for AUTO PROGRAM------engage that and the set will scan thru all the available
...skip this step and go to step 4. 1. Hold down the TV POWER key. 2. Enter the three-number TV code. 3. Release the TV POWER key. The TV should turn off when the third number of the code is entered. If ...
I have a samsung pn50a450 plasma tv. The top of the tv has "dancing?" pixels. I have a directv r15 dvr using s-vid out to a harmon kardon avr345 upconverting to hdmi out to the tv. I have ...
Question about Mitsubishi Televison & Video
...Direct TV HD service? if it is a ws-65613 you would have to be connected to the DTV component input on the back of the set as this is the only HD input for this model. If the set will not go to that ...
skip command to. Hope that helps.... try this code 10000 If the 5 digit code that Comcast provides didn't work, better call them. dear, Have you tried to just do a code scan on the remote. If there is
...You should be able to move them up, down, left, and right. If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.
Question about Hitachi Televison & Video
...box itself and be connected to a "hot" outlet - one that you KNOW works. Test it by connecting a TV directly to outlet. If you get a weak signal, the box will too. Digital boxes require a clean SNR. ...
27 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions