Sony KP-51WS500 51" Rear Projection Television "diagram back tv mounted" Questions

...back of tv,take the back bottom panel off.there about 7 or 8 screws that need to be remore.the convergence ic's metal box is mounted on the left side outside on the frame by three screws and has 3 ...

back off. Error code blinks 2-2. From reading it sounds like the convergence chip and fuse. I'm confused which chip I need. STK392-570 or STK393-110. And are there one or two chips? Also can you email

diagram. Find out with the scope, if the horizontal drive pulse is there when you turn on the set. If it is not then go back to the SMPS and check that. If it is, check the drive all the way up to the

diagram also which details all the connector placements Not sure if anyone is still having this issue. Try this: 1) Unplug the electrical cord from the wall. 2) On the front panel of the TV, hold down

...back, in short order, as the prime cause still, hasn't been fixed., Now Capacitors hate AC ripple, or Over Voltage. Thats it. Oh.. and Heat, if these Capacitors, are too close to a Heat Source, then ...

...back, in short order, as the prime cause still, hasn't been fixed., Now Capacitors hate AC ripple, or Over Voltage. That?s it. Oh.. and Heat, if these Capacitors, are too close to a Heat Source, then ...

back, in short order, as the prime cause still, hasn't been fixed., Now Capacitors hate AC ripple, or Over Voltage. Thatâ??s it. Oh.. and Heat, if these Capacitors, are too close to a Heat Source

Diagram available? I have an RCAr52wh74 with a ITC222A chassis. When I turn the set on, I get a one second small click/ spin sound (?) and the green light comes on and off without the set actually ...

back to me here, or use the ASK function to go straight to me :) If you are still unsure, have problems, or we need to look at the situation more deeply, then before you give a rating for this advice,