Sony KP-51HW40 51" Rear Projection Television "taking apart direct tv remote" Questions

...tv. I also tried a replacement remote and no fix. I replaced the infrared receiver module (~$4 from Radio Shack) on the TV, yes it involved taking the tv apart. Voila, now I have two working

apart with the lowest arc being the brightest. I am guessing "convergence" ? problem but I know nothing. I am handy and IF I can do the adjustment please tell me how. If it is a component replacement,

apart and put it back together...should i use a specific coolant for this model/color? and do the seals absolutely have to be replaced? Your TV most likely has one of two possible problems. Problem #1

...taking the TV completely apart (if you have a really little screwdriver and really little hands you might be able to get them out be reaching in through the bulb access door - I doubt it though). ...

...direct DTV signals coming from the TV stations are in the Kilowatt range (analog was usually more than a million watts!) They have now become more sensitive to interference from the back and sides of ...

...apart.. These IC's operate at a very high temp, and usually only last 4-5 years. If you remove the back of the set, you will want to look for the BIGGEST heatsink in there, on that heatsink, you will ...

...taking electronics apart for over 30 years, and I have never seen such thermally stressed, brittle plastic like I did when I repaired my sister's Toshiba (by replacing the convergence ICs). If you ...