Question about Philips Televison & Video
...TV for the most part, but the distortion is a little annoying. Any suggestions of what needs replacing? I'm willing to give it a shot, but need some advice. Thank you in advance. Robert You have a ...
...TV set, no need to search and order multiple parts from different sources and pay multiple shipping fees! The kit comes with original Sanyo STK IC?S , not those cheap aftermarket or china made IC?S ...
tv will turn off while using the microwave that is about 15' away. Thanks in advance!! Nick Not an expensive repair, relitively speaking. Both convergence amps need to be replaced, Ic7001 and Ic7002 (
...Sanyo STK chips, convergence resistors, pico fuses, etc. Problem #2 CRT Fluid is Cloudy Projection TV tubes have a liquid coolant that is used to keep them from overheating. After many years the ...
Question about Panasonic Televison & Video
...Sanyo STK chips, convergence resistors, pico fuses, thermal paste, etc. Everything you will need to do the repair yourself. http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html Change ...
Question about Sony Televison & Video
...photo instruction guides, original Sanyo STK chips, convergence resistors, pico fuses, etc. ...
Question about Sony Televison & Video
...tv settings then goto the convergence section. Try to adjust the red and then the blue convergence. You should be able to move them up, down, left, and right. If you can't move them in all directions ...
Question about Sony Televison & Video
...tv settings then goto the convergence section. Try to adjust the red and then the blue convergence. You should be able to move them up, down, left, and right. If you can't move them in all directions ...
...Sanyo STK chips, convergence resistors, pico fuses, etc. Hi Bryan I you are not a tech and you dont have a schematic then it is useless for you to work on the tv call a tech to repair your tv.good ...
Question about Philips Televison & Video
...TV the image all of a sudden got distorted toward the bottom half of the screen. The red was not aligned with the image. I thought the Multipoint setting got messed up so I went to the RED settings ...
419 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions