Sony KP-51WS510 51" Rear Projection HDTV-Ready Television "old phillips tv turned red" Questions

...Phillips Projection TV with an intermittent power problem. It turns itself off after 5 minutes of being on. Sometimes it won't even power up. The problem continues to elude me. Can anyone shed some ...

...since. I have a rear projection phillips magnavox about 10 years old. it was only used probably about 3 years. When I turn it on it shows briefly AUG 1Y PB PR and thens goes off. Any suggestion? ...

old, and you registered it with Toshiba, you could qualify for a free replacement. otherwise expect to pay 200.00 for a new bulb from Toshiba. only good thing is you can replace it yourself, only tool

...old. Many thanks everyone. Neetika i also have same or similar problem with my 60" phillips hd projection tv, model # 60pp9200d/37. i umplugged satellite receiver, tv, dvd player from wall for one ...

Phillips 51" Screen Distortion My tv started acting very strangely, and I'm pretty sure it is about 3 years old now. When you turn it on, there is a red hue about 1/4 up the screen. Anything under the

old phillips 60PP9202 t.v. that has red lines at the top of the screen and at the bottom a double image of the picture in red. The red and the blue converge are lined up as well as the multpoint blue.

old, and you registered it with Toshiba, you could qualify for a free replacement. otherwise expect to pay 200.00 for a new bulb from Toshiba. only good thing is you can replace it yourself, only tool

...old then I would recommend it's replacement. If it's not then a house call is your only choice due to the size and weight of your television. I can't find any data with Phillips about this set which ...

...a minute or two AFTER the set has been turned off from running. get a phillips or panasonic TY-LA1000 bulb or a P22H 120 watt one if you can remove the old one from the housing (not very hard to

...Phillips-head). Unscrew the sealed part of the lamp that can be found at the television's rear part. Take away the old lamp cartridge and then insert a new one. Seal the lamp with screws, replace its ...