kp51ws510 power problem TV will not turn on It blinks 6 times pauses and flashes 6 times Gould, heres your fix, replace both IC`s marked "MCZ3001D" on the top of the chips, they are both located on ...
...KP51WS510? Hi, Remove back cover of tv and on left side thee is D Board that has 2 big black ICs mounted on big aluminum heat sink, these are convergence chips in Sony KP-51WS510 tv. Below is an ...
kp51ws510 rear projection - the picture is black and white untill it seems the tv has warmed up. can i replace the bulb in this tv or is this not the problem? The bulb is not the problem.Unplug,replug
...KP51WS510 seven years old - have double image. Ur tv have a problems known as a convergence problems,it is dead.The tv convergence board must be repair by replacing 2 STK convergence ICS and some or ...
...KP51WS510 has the two STK392-560 ICs on the D board ( Brown Board laying flat on the left side) you will see the large heat sinks with the fins on it. The ICs are mounted to the heatsinks. In that ...
...KP51WS510 and I was told the convergance amplifier was going out and I was needing info about where it is located so I can change it out. Thanks convergence output IC problem. convergence board would ...
...KP51WS510 seems to have some convergence issue! I was told chip set2(STK Pack 392-560) has been gone bad. Does this sound right? And how much actual part costs? What should be the reasonable estimate ...
...kp51ws510 The color just started to flicker then it goes back to color then it will flicker then its black and white. What it going on. How could it be fixed These sets are famous for bad picture ...
...KP51WS510, KP57WS500, KP57WS510, KP57WS520, KP65WS500, KP65WS510 SUBJECT: Picture gets bright then shuts down. After repairs tech noticed a mark was created on all 3 CRT's. CAUSE: Found Video Output ...
419 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions