Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television "hdtv projection lamp running" Questions

...wont turn on trys to come on then turns off then red lamp buuton comes on Is all of your Fans running CK lamp fan if it stops running then lamp will not Light also Ballast board is what turns Lamp ...

...hdtv will not power up when plugged in standby light is lit turn on then it flashes lamp led it after theen goes back to standby mode repeats this process three times then all three lights come on n ...

...Projection TV I recently ordered a new lamp for my tv but still no picture and the lamp light continue to blink. What is else can be the problem? The HV circuit that runs the lamp is out or the ...

...stays on hitachi i think it is a 55 inch model # 55vs69a CK the Lamp Fan to see if it is running ,If you are still running the orignal Lamp then replace it . Mats has them for $99.00 ...

...lamp or is there another fan that should be running but isn't? Possible side effects of lamp going bad are a deformed lamp exhaust duct. Lamp part # 915P049010, Lamp Exhaust Duct part # 642B155010, ...

...Lamp fan. Encompass Parts Distribution 1-800-638-3328 If Lamp Fan is not running when lamp trys to come on TV will turn off in order to protect the Lamp The Ballast Board is what turns the Lamp

...projection lamp,this problems it happing too?Yes,than the board that call the Ballast board should be replace too.The Ballast board only job are to ignite the tv projection lamp.If the tv projection ...

...no picture..... do we have a bad lamp? IF your Fans are running then your ballast board is not working replace it. A Bad Lamp Fan can also keep set from turning on otherwise your lamp needs ...

lamp light flashes lamp light flases, fans run set does not come on. Replaced lamp, same problem. wiil get back to you.

Check the Lamp Fan, if it stops running when Lamp trys to Light then set will shut off to protect the Lamp.If the Lamp Fan is OK then it will be Ballast that connects to Lamp it is what powers Lamp on