...ballast and the red lamp light came on after the TV was powered up,same problem.I then changed the power supply board(part#930B921002)when I powered the TV up,the TV shut down and the red lamp light ...
Question about Samsung Televison & Video
change the Ballast Board. I tried to look for your ballast with your TV Model # at samsungparts.com , but nothing showed up. You will need to find out which ballast part # you have in order to find it
...tv model don't have a colors wheel.U hear alot of clickings sound,when power turn on?The Ballast board it dead.This board,job to help projection lamp to ignite.Tries websites like ...
Question about Sony Televison & Video
...TV immediately and contact the company you purchased the lamp from. this is common in older DLP tvs but not in one 5 years old unless you have a lot of hours on it. the connector can crack and arc ...
...is on. The TV does not turn on at all anymore. Can you help? replace Ballast Board it is what turns Lamp on! Call Encompass 1-800-638-3328 You can somtimes find good deal on Ballast Board at ...
how to change ballast in zenith rear projection tv model D52WLCD WRONG TV -SORRY
how reset the lamp timer I have changed tv lamp,and ballast,but still having the same problem,my tv turn off after a minute or so What is the model number and brand---Mitsubishi or what?
ballast board first. If this help you, there is no need ot replace the lamp. Picture of the ballast included here for you to compare. If replacing the ballast dis not help you, change the lamp too. OK
...ballast. Have you ever changed the lamp/bulb of your TV? When the LED shows green, it means it is a lamp problem. The ballast helps to ignite the lamp and make it function well. So you might have to ...
1,050 questions posted
Usually answered in minutes!
1,430 Questions
716 Questions
647 Questions
601 Questions
479 Questions