Question about Panasonic Televison & Video
door lamp switch? is it just an open closed switch? thanks Tony The door switch is in the front. The switch is triggered when you put the lamp door cover back on. It is a switch thats spring loaded so
...door switch, replaced lamp, held down door switch with rear cover off, still tv does not turn on. After all this I still get 3 red blinks. Any suggestions would be great. 3 blinks is the lamp door ...
.. replaced lamp and adjusted lamp door could switch for door need replaced? Make sure that lamp door is fixed securely and pressing lamp door switch as 3 times blinks shows lamp door switch is not On
...switch on the door and another located on the lamp socket board. You can bypass on the door but there is no way I can describe how complicated it is to get to the one on the lamp socket. So, try ...
...or pen, do it and see if the message goes away if it does you found the problem. the door isn't contacting the switch. try to close the door using flashlight making sure the door pushes the
door switch is bad (less probable case). Remove lamp door. Locate pin that pushes into lamp door switch. Figure out where it pushes, find switch lever over there. Check if it's broken. Than re-install
...door switch is positioned in such a manner that if the door is installed straight on, it pushes the switched are up. When the cabinet expands, due to normal heating, the switch moves just enough that ...
...door switch? What do I need to put to hold the switch? The door switch is for safety. Is the door deformed (PN: X-4042-246-4), which is causing the error? Twisting the 2 wires together (after ...
Question about Sony Televison & Video
door switches go bad. They develop resistance in the switch, not allowing the TV to realize that the switch is completely closed. Also, the lamp doors do warp, and I believe the lamp door for this set
166 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions