Sony Grand WEGA KDF-60XBR950 60" Rear Projection HDTV "buy thermal fuse replacement" Questions

near a FBT,a flyback tranformer,a big block of plastic with a brown or red wire going to a board.Replaced these thermal fuses,and also resolders the FBT.Go to Ebay.com to buy these FL301 thermal fuses

...Thermal Fuse or even the Board. You can buy replacement here: Appliance parts, electronics parts & more from PartStore.com Buy also the service manual, you find it on same website , the manual has ...

...buy? What is more confusing is what you wrote after that... "remove the back cover and measure for continuity across the thermal fuse above the lamp housing. if open jump it wth a 5 amp fuse, be sure ...

...thermal fuse like mentioned by leslake). The model you need for your Grand Wega is called the Sony XL 5200. I recommend buying from DLPLamps.com, they've been a great help to me in the past and they ...

...Buy techsa "thought" it was the lamp or light bulb. I replaced it with a new one and it did not fix the problem. What's wrong with this TV. Tanks you most likely have a thermal fuse open, without the ...

thermal fuse? Found that the thermistor/temp measuring device is suspect, no resistance across legs. There is a label there that says F701 see service manual http://www.goodmans.net/get_item_th-tf117c

...buy one. Before going, check all resistors off the SKT393-110 (as someone made a comment this could be a cause for a bad chip,) and they all measured nearly identical values. I forget now, maybe 330 ...

buy along with the IC a thermal compound. Check the pico fuses on the same board. Most likely you will find a blown one. These fuses look very much like a resistor, not like the usual transparent fuse

...buy the convergence repair kit that includes these parts, thermal paste, photo instructional and soldering manual. Click here. Let the unit unplug for 1 hour to before you repair it, click this ...

...thermal paste with chips. I do have a question as to why the fuse resistors read 2.6 ohms when they are labeled as 1.8 ohm resistors. Resistors on board read 2.6 as well as new resistors. Please help ...