Pioneer (dvr-a06u) DVD±RW Burner "jumper settings" Questions

Samsung TS-H492 Jumper I've been given a DVD-RW by a friend to replace a faulty one. I can put a DVD in the drive but Windows XP doesn't see it. I presume the jumpers on the back aren't set right. My ...

How do you set a LG GSA-H10A DVD Drive as a Slave? Which of the three jumpers is the Slave Jumper? Closes to Data Cable or Middle jumper or closes to Audio Socket? Hi, on the drive there will be ...

...jumper settings, if hard drive is set as Master, the DVD writer it should be as Slave, if the hard disk jumper is set to Cable Select (CS), the DVD should be in the same way too. After this check if ...

jumper settings for samsung dvd drive I'm installing the above as a master to a rom slave - need the jumper settings There should be a diagram on the drive indicating the jumper positions. Good luck!

...in computer i ave both in but only reconises 1 if you are using IDIE cable.set as try to see the jumper on the markings slave. if sata it will auto detect. If they are both connected to the same ...

The jumper combination for a slave drive on an LG GSA-4163B See above^ Most CD/DVD drives have a label showing the jumper setting for Master (MA), Slave (SL)and Cable Select (CS). You only need a ...

...jumper settings are! There was absolutely NO drive info included with the drive, and Toshiba doesn't seem to have any info on that either. :( Thanks in advance for any help you can offer. The jumper ...

Jumper setting for cable select I need the jumper setting for cable select so the BIOS sees the drive The settings should be on the sticker on top of the cd drive.

...dvd sh-m522c the main problem that he computer cant see the dvd driver please have a look to your jumper setting... if you didn't got your dvd driver after jumper sittings then reply to this

...settings for plastic jumper location is usually printed on the top of a hard drive IDE-0 means Pri master IDE-1 means Pri slave IDE-2 means Sec master IDE-3 means Sec slave single or master ::::: ...