...amp. if a fuse is blown it normally wont turn on. but take your fuses out hold them to a light and you will be able to see through the fuse. there will be two prongs that will be connected by a U ...
...fuse (which might be inside the amp) If the PROTECT light does not come on, then check your speaker wiring and speakers. If you have access to different speakers and wires, try swapping them out to ...
...fuse, pressed power button, heard a pop and the amp went into protection mode. I took the cover off again fuses are fine (not blown), but for a moment sparks/arcing occured on the board towards the ...
amp that quit working and is in protect mode First thing to do is check the fuse. If it is still in good condition then you may have blown your ampYou can make sure no wires are touching an also tried
...wiring and fuses... check well, (is the amp in protect mode?). if you have another amp it can aid you in this.. worse case is the amp is fried.... if you would have given more info I could help ...
Question about Samsung Audio Players & Recorders
fuse. So the cause of it going off will be an overload in the power supply or main amp. Check all the parts in those sections, you might see something burnt or damaged, pay close attention to anything
Question about Crown Audio Players & Recorders
...It's best to assume there is a short circuit in the power amp board. The unit is going in to protect mode to stop it blowing fuses etc. Could be caused by bad speaker wiring or connections by the
Question about Audio Players & Recorders
...amp just powers up in protection mode some voltage must have reached some other part of the circuit maybe the output devices? can you help? Probably blown out the output transistors/or Power amp IC. ...
Question about NAD Audio Players & Recorders
amp via a 3.5mm cable to my computer. When I try to play music even moderately loud the protection mode will kick in and I have to restart it. Its paired with PSB alpha b1 speakers so I know thats not
...amp switched to bridge mode but got no sound. when put back to main 1 & 2 I get no sound at all. what has this caused to go wrong. sometimes when you switch amp on you hear a click & the ...
31 questions posted
Usually answered in minutes!
415 Questions
267 Questions
266 Questions
180 Questions
148 Questions