no power everything was working fine now cnt turn it on was plugged into a power board smells like something is burnt is this stereo repairable unhook the power cable and rehook it. and turn the power
HI I HAVE SONY MHC-RV900D WHEN I SWITCH IT ON IT SHOWS PROTECT PUSH POWER. HOW CAN I PLAY MY SYSTEM AGAIN.?? Welcome to FixYa Do Following... Turn off the System-Turn it off for a while Then turn it ...
Question about Sony Audio Players & Recorders
power on, it turns first on regular but after 3 seconds, it gives a click and powers off, pls. help me! thank you Sounds like you have a short in the unit. You will have to take it apart and check the
Question about Teac Audio Players & Recorders
...power button on the unit nothing turns it back on. CD door does not open either. Turned the power switch off on the back of the woofer and the illuminated background goes out and power light as well. ...
power light turns red showing the ac plug is plugged in. I press the power button to turn on the radio and it sounds like it will turn on for 5 seconds and then shuts down. The problem is in the audio
i turn the stereo on and it turns off and then the power button starts blinking i turn the stereo on and it turns off and then the power button starts blinking
Question about Aiwa Audio Players & Recorders
...it after a while, say five minute after. If it dow not help you to reset this device:Press "Power" while pressing [>] [Play] button on the unit.If this also does not help you, do as ...
...power protect comes up.I've tried disconnecting all speakers and left the unit off for 2hrs or more and turns it back on without the speakers connected.Still the same message comes up.Please can ...
...center wont power up, then its the power supply thats the issue. If it turns on and the screen says " Booting please wait " and does nothing else then internal hard drive is at fault. Hope this
Question about Sony Audio Players & Recorders
sony HCD-LX10000 will power on then turn back off I turn power on then it goes through the "demo" mode. if I select a source, it will make a clicking noise and then power off. The power ...
9 questions posted
Usually answered in minutes!
415 Questions
267 Questions
266 Questions
180 Questions
148 Questions