Sony STR-DB940 Receiver "amp cuts channel back volume" Questions

...cuts again when the volume is increased Swap the speakers to see if it correlates. Generally speaking, an amp attempts to protect itself from heat, shorts, overloads and operator exuberance by ...

...cuts off saying protect...! How do i turn off the protect to allow sound to increase.? I would check all speaker connections and speakers, check the speakers with an ohm meter and compare the ...

...connection. If letting the unit cool down brings back the sound, its the power amp section. amigos tengo technics sa dx 750 necesito codigo para control remoto RM Y 181 gracias quien pueda ...

...cuts on and off on some channels. DVD player works perfectly. I've done this before but want to make sure I'm doing it right. I can't find my manual. I turn the 2309 completely off and even uplugged ...

...channel cutting out at low and moderate volume ranges. Twisting the volume control back and forth solves the problem temporarily. It seems to this only while in the tuner mode of operation (or maybe ...

...cuts off. if this is the first time youencounter this then something must be wroing with either your speakers or your amp. unless your ventilation is not good enoughg, you can also try placing a ...

...volume up to get the output but am concerned on the cause of the reduced output? make sure your tape monitor switch is not on. I'm not sure how long you've had this unit but over a period of time ...

...back on and it works fine for another 10 min or so. If I turn the vol down to under 35 or so..OR listen to a movie that has NO loud explosions, or yelling..it does not have this problem. I have had ...

...cuts out when sound quality input changes on my rxv1700 My rxv1700 is hooked up using a HDMI cable to my expressvu PVR. On a few of the HD channels I have problems with the sound--it works fine until ...

amp; he soldered all the joints on the main board back as he had found some were broken. Now, it had been 5 days since I have gotten my receiver back and the clicking noise is gone. My only concer now