and set to "text" mode, and the set is blanking out the area where the test would go. This often happens if someone presses the button on the remote that controls caption settings without realizing it
...mode keys blink twice to indicate that the code was accepted. 4. Point the remote at the TV and press power to test the TV. 5. You can then successfully use the "Video Source" button on the bottom ...
...mode without the remote. The first thing you need to do is to check whether your power supply is working well. To do this, you need to open the back cover of your tv. You can immediately reach the ...
Question about Emerson Televison & Video
mode where I set the tv up but I can't get it off the screen to watch tv and I was using a universal remote to operate it but can only use the buttons on the tv! Help plz Without a remote control, you
Question about Televison & Video
...mode) 2. All on screen instructions are in German. TV worked perfectly in previous situation. I've tried to find "setup" in order to reset language but cannot find it no matter which button I push. ...
...without any problems until last week when the image appeared fuzzy or none. I called the cable company and they came by and said it was not a problem with them. The problem seem to be when put on TV/ ...
...mode. Ensure also that the fault is not coming from a faulty receiver box sending bad signal, check if you get same problem on DVD with no receiver box connected. Try first leaving the TV power cord ...
...test connectors, switches, or anything similar present on it. Usually the Guide Plus stops working entirely (which is nice for most users, as it is just an annoyance). Now if you unplug your TV for ...
...mode transformer secondary are good na dnot blown. Any ideas? the power supply module is malfuntioning this can be replaced by a local service tech. if all the three fuses are ok.then you r right the ...
52 questions posted
Usually answered in minutes!
222 Questions
140 Questions
115 Questions
101 Questions
92 Questions