...10) unplug the battery power cable (one red and one white wire) from the camera To reinstall use reverse procedure. I tried it a few times on the broken camera first. It is not too bad, a bit of ...
...top of the holder first with solder near its edge. I scratched up the surface a bit with my exacto so I could tin it. Then slid the battery in, and soldered the edge to the battery. Its not going to ...
10 that will not download. Can you help? Below is the standard procedure for checking for solutions. If you have a card reader available, I'd recommend removing the memory card from the camera and
...10 total, latch plus shipping and handling) and the original spring on hand. I took all of the eight screws holding the camera body together. I also pulled off the "rubber" hand grip on the front of ...
...10 came today all of a sudden. The screen is blurry and the zoom does not work. The camera has not been wet or dropped. Do you have any solutions for fixing the problem? I have tried intializing ...
...top of it and slid it into place, and then pushed down one side of the black thing to secure the orange cable in place, Then I put the other orange cable back and the red and black cable back, and ...
10 minutes. My screen was only either blank or had black bars on top and sides of screen with all 8's in the centre of the LCD. I tried everything I found online to no avail, finally I got **********
...top of the cover is clipped in under the shiny silver bit with the on/off switch and shutter button (I?ll call it the switch/speaker assembly). I find that inserting a finger nail and gently applying ...
569 questions posted
Usually answered in minutes!
447 Questions
404 Questions
346 Questions
305 Questions
277 Questions
