Question about Televison & Video
...antenna/cable select menu. JVC Master Command III old television (appx 1990) - no remote - can't figure out how to select cable mode in antenna/cable select menu. Check the model number on the ...
television that's ok, just connect yellow and white and leave the red plug dangling. Connect the antenna to the converter box where it says antenna/in. Plug in everything and turn everything on. Press
...antenna to get cable u cant.......the antenna gets only over the air signals while the cable are actually wire transmitted signals meaning if its cable transmission u want u will have to consult the ...
...television back on. When you access the Channel System menu, you have the access to the submenu choices. Change the Antenna option to CATV and the Current Channel to 3. Reconnect the cable box to the ...
Question about Televison & Video
...television and/or vcr have a cable connector and/or a set of rca outlets? if they have a cable connection in the back all you have to do is hook the cable from the antenna to the "in from antenna" on ...
television (f38310) and was wondering if I could hook it up to cable? If so how can I? using your cable box connect the audio and video outputs to the tv via the RCA inputs1, 2, 3, or component inputs
...cable. Is the antenna pointing in the right direction? If you're far away you will need a directional antenna set directly into the emitter if you want a good signal . If you did both and you don't ...
...cable to hook to the other antenna adaptor that goes to rf cable on the box? Sorry...I'm not good with electronics, cables, etc. Thank you! Robin The antenna connects to the ant jack on the digital ...
Question about Daewoo Televison & Video
...antenna to cable without a remote I have cable attached to the TV. But, I lost my remote so I cannot change the TV setting from "antenna" to "cable." There is no menu selection on the TV itself. Is ...
...ANTENNA TERMINALS IN THE BACK OF THE TV. THE CABLE CONNECTION HAS BROKE OFF. HOW DIFFICULT IS IT TO REPLACE THE ANTENNA TERMINALS you need to take off the antenna so that can solder the antenna ...
189 questions posted
Usually answered in minutes!
422 Questions
267 Questions
265 Questions
155 Questions
150 Questions