...motor belt, holding front pulley so mode switch doesn't move. Slide chassis back in place temporarily and connect CRT circuit board, Dag ground wire, Degauss. coil connector, speaker connectors not ...
...clock ) WITH a motor connected to the same line\wall\outlet\power adapter? 2nd) Any loose ground [wires that go to any menal part inside TV\VCR will cause problems. Be very carful inside
...that is easily removed by removing some screws holding it to the board area and manipulating some wired over it... You should then be able to see the tape and what's hanging it up. If you need to ...
...wire things like that. To no avail, I have been unsuccessful. I was hoping you knew how to fix this tedious problem. Best regards. If some areas of the screen are blue and green while other areas are ...
all TV's in house failing, a few at a time 3 weeks ago, the TV quit working after pushing the manual switch on/off. 2 weeks ago, one TV was staying on 30 minutes and then cutting off. You could turn ...
...your carefull and dont care if you ruin it or not BUT I do not recommend it as there are super fine wires and ribbon cables inside these puppies that even a sneeze while holding one while open could ...
motor had broken a gear off; a little glue fixed it, no problem) so I opened the TV up and fixed the DVD tray, no problem. To do so I had to take off a wire (red, 2-prong, going from the circuit board
154 questions posted
Usually answered in minutes!
422 Questions
267 Questions
265 Questions
155 Questions
150 Questions