Emerson EWC13D4 13 in. TV/DVD Combo "fix volume" Questions

...remote to see if there is one button labeled "mute." If so push that when tv is on and see if that fixes sound. Or find volume buttons on tv and hold down button that is for increasing sound, should ...

...volume works just fine. im thinking maybe a reset will fix this problem but i dont know how to do that. help me please. Its speaker, audio output circuit etc shound be suspected. Contact any service ...

...volume is stuck on 64 and wont go down. How do we fix this? If you have the remote,have you tried it ? Have you tried the volume button on the front of the set ? If neither the remote or the button ...

...the wires, I notice that the right speaker goes in and out. How do I fix this?! you use auxilry port in your tv as volume problem volume out from direct TV cable bos insert in tv auxilry ...

control works by adjusting the voltage\current to the speakers. The VOLUME CONTROL could be damaged\fixed at a point [even if you are raising\lowering] at high volume.Sometime the control has a crack

...volume itself. No one at Sears or Sylvania has been helpful in troubleshooting this problem. I do NOT want to send the combo unit to the repair shop, as the repairs will most likely cost as much as ...

...volume is nothing but static. do i need the original remote to fix this problem. How can I tune in the channels. You won't need the remote to fix what you've described - I'm certain it has nothing to ...

...fix it. Also, the volume is barely a 4 or 5 when I turned it up all the way! Please someone help I have read that if you unplug the unit for more than about 4 hours, it will reset to the factory ...

Fix Value EEPROM 4. Use the ?Channel up? or ?Channel down? to select the category. Note: Not all models will have 5 categories; some will jump to the 'Signal' category. 5. Use the 'Volume up' to enter

...put good batteries in it as well! Thanks Coopette Your remote is bad that you know. Is it worth fixing it> No, Highly unlikly. A universal remote for about 10 bucks can be used to change channels ...