Olympus Camedia C-350 Digital Camera "makes beeping sound" Questions

...beeping and blinking the two lights, orange and green, near the view finder. However, sometimes...and i am not certain what makes it work.... a combination of frustrated shakes, leaving it without ...

...Makes a beep sound. Then cuts off. it´s normal in that kind of cameras it can be fine but after u shoot one pic with flash will happen the same, to fix the problem u will need to send it to a repair ...

Problem with camera Camera appears to operate OK. Green power light adjacent mode control flickers when camera switched off. does not go out at all. It is lit up fully when camera switched on. I have ...

...is stuck open. The lens will not retract when turned off, and it will not take pictures when on. It makes clicking noises and then a beep -beep-beep with the green light flashing on and off a few ...

...makes crunching sound -- like the lens cap is still on -- even though the lens cap is off. Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. ...

PowerShot SD600 Digital Camera: Turn camera on and it makes a few beeping sounds a... Turn camera on and it makes a few beeping sounds and say lens error restart camera Try these procedures. 

...makes an error sound of 2 beeps followed by 3 beeps if i press and hold the on button and then press the on button it makes the first 2 beeps lights the lcd screen where you ca read ver. 1.02 and ...

makes the three beeping sounds and turns off. I know that the beeping sounds are usually because the lens is askew, but the lens is retracted in my camera and I can't move it. i had the same problem a

...exilim on but ten it makes a beeping sound and turns back off If you have a beeping sound with no other message it is an indication you have a low battery. How old is the battery for this

...makes a beeping noise EVERY time I push a button on it! It's really annoying! How do I turn the beeping noise off??? Tap MENU to bring up the menu screen. Tap the wrench tab to access the Setup menu. ...